Recuperator PRANA 150 ERP LITE - home ventilation system


The diameter of the housing 
of the working module: 150 mm
The diameter of the mounting hole: 162 mm
The length of the working module: from 450 mm
The recommended area of the premises: up to 60 m2.
The volume of air exchange during recuperation:
Inflow: 105 m3 / h
Exhaustion: 97 m3 / h
In the “night mode”: 12 m3 / h
Performance coefficient: 95%
Electricity consumption: from 3,6 W* h to 17 W * h
Control system: remote control or the Android mobile application.
The “Mini after-heating” function*
The function in the “Winter mode” **
Due to the irregular shaped channels of the copper heat 
exchanger, the noise level 
is reduced by 7-8 times compared to the initial level.
Separate control of the inflow and exhaust.

System configuration

Separate control +
Identification of filter condition +
Date and time +
Sleep timer +
Bluetooth support +
Atmospheric pressure sensor +
Temperature sensor 1 +

Additional information

The “MINI AFTER-HEATING” function is for models PRANA-150, PRANA-200 and PRANA-200C. It allow ex-tend the temperature range of the Prana system to -25 ° C (-30 ° C). The function is turned on / off from the remote control or from the smart-phone using the Android application.
When working under extreme temperatures, it will prevent icing of the heat exchanger and fans of the  recuperator. In the night mode, the temperature of the inflow air is additionally increased by 3-4 ° C.

The function in the WINTER MODE is intended to prevent icing of condensate drain during cold season or 
to freeze it if icing has occured.
To avoid icing and to ensure the correct operation of the recuperator at a minus temperature outside, 
the use of the “Winter Mode” is obligatory.

Recuperator PRANA - 160 ERP LITE / decentralised Mechanical Ventilation with heat recovery (dMVHR), RESIDENTIAL SERIES 

Recuperator Price £630.00


Assembly and installation

System configuration

some text