RRecuperator PRANA 160 ERP LITE
The diameter of the housing
of the working module: 150 mm
The diameter of the mounting hole: 162 mm
The length of the working module: from 450 mm
The recommended area of the premises: up to 60 m2.
The volume of air exchange during recuperation:
Inflow: 105 m3 / h
Exhaustion: 97 m3 / h
In the “night mode”: 12 m3 / h
Performance coefficient: 95%
Electricity consumption: from 3,6 W* h to 17 W * h
Control system: remote control or the Android mobile application.
The “Mini after-heating” function*
The function in the “Winter mode” **
Due to the irregular shaped channels of the copper heat
exchanger, the noise level
is reduced by 7-8 times compared to the initial level.
Separate control of the inflow and exhaust.
- Unlimited Web Space
- FREE Site Building Tools
- FREE Domain Registar
- 24/7 Support
- FREE Marketing & SEO Tools
- 99.9% Service Uptime
- 30 Day Money Back Guarantee
*MINI AFTER-HEATING” FUNCTION
The “MINI AFTER-HEATING” function is for models PRANA 160, PRANA 200 and PRANA 200C. It allow ex-tend the temperature range of the Prana system to -25 ° C (-30 ° C). The function is turned on / off from the remote control or from the smart-phone using the Android application.
When working under extreme temperatures, it will prevent icing of the heat exchanger and fans of the recuperator. In the night mode, the temperature of the inflow air is additionally increased by 3-4 ° C.
** FUNCTION IN THE “WINTER MODE”
The function in the WINTER MODE is intended to prevent icing of condensate drain during cold season or to freeze it if icing has occured.
To avoid icing and to ensure the correct operation of the recuperator at a minus temperature outside, the use of the “Winter Mode” is obligatory.