Recuperator PRANA 210 C
The diameter of the housing
of the working module is 200 mm
The diameter of the mounting hole: 210-225 mm
The length of the working module: from 500 mm
The recommended area of the premises: up to 120 m2.
The volume of air exchange during recuperation:
Inflow: 185 m3 / h
Exhaustion: 177 m3 / h
In the “night mode”: 21 m3 / h
Performance coefficient: 93%
Electricity consumption: from 3,96 W* h to 35 W * h
Control system: remote control
or the Android mobile application.
The “Mini after-heating” function *
The function in the “Winter mode” **
Separate control of the inflow and exhaust.
*MINI AFTER-HEATING” FUNCTION
The “MINI AFTER-HEATING” function is for models PRANA 160, PRANA 200 and PRANA 200C. It allow ex-tend the temperature range of the Prana system to -25 ° C (-30 ° C). The function is turned on / off from the remote control or from the smart-phone using the Android application.
When working under extreme temperatures, it will prevent icing of the heat exchanger and fans of the recuperator. In the night mode, the temperature of the inflow air is additionally increased by 3-4 ° C.
** FUNCTION IN THE “WINTER MODE”
The function in the WINTER MODE is intended to prevent icing of condensate drain during cold season or to freeze it if icing has occured.
To avoid icing and to ensure the correct operation of the recuperator at a minus temperature outside, the use of the “Winter Mode” is obligatory.