decentralised Mechanical Ventilation with heat recovery (dMVHR), Domestic series. Price ÂŁ1, 850.00Â Excl VAT
The diameter of the housing of the working module: 340 mm
Diameter of the mounting hole: 350 mm
The volume of air exchange during recuperation:
Supply: 1100 m3 / h
Exhaust: 1020 m3 / h
Heat recovery efficiency: 78-48%
Electricity consumption: from 80 W / h to 310 W / h
(depending upon the mode of operation).
It is possible to connect the recuperator to the system of ramified
inflow and exhaust channels (ΣΔР≤ 350Pa).
Also, the system can be made both for installation in the wall,
and for placement inside the room. The ventilation system is controlled using 1-2 dimmers (standard equipment), or profes-sional control units (is completed to order).
MINI HEATING UP” FUNCTION
The mini heating up function is for PRANA 160, PRANA 210G and PRANA 210C models. It allows you to ex-tend the temperature range of the Prana system to -25 ° C (-30 ° C). The function is turned on or/ off using the remote control or via the app.
In extreme temperatures, winter mode will prevent the heat exchanger and fans of the recuperator from freezing. In night mode, the temperature of the inflow air is increased by an additional 3–-4 ° C.
“WINTER MODE”
The function in the WINTER MODE is intended to prevent icing of condensate drain during cold season or to freeze it if icing has occured.
To avoid icing and to ensure the correct operation of the recuperator at a minus temperature outside, the use of the “Winter Mode” is obligatory.
