Recuperator prana 340S round
The diameter of the housing of the working module: 340 mm
Diameter of the mounting hole: 350 mm
The volume of air exchange during recuperation:
Inflow: 1100 m3 / h
Exhaustion: 1020 m3 / h
Performance coefficient: 78-48%
Electricity consumption: from 80 W / h to 310 W / h
(depending upon the mode of operation).
It is possible to connect the recuperator to the system of ramified
inflow and exhaust channels (ΣΔР ≤ 350Pa).
Also, the system can be made both for installation in the wall,
and for placement inside the room. The ventilation system is controlled using 1-2 dimmers (standard equipment), or profes-sional control units (is completed to order).
*MINI AFTER-HEATING” FUNCTION
The “MINI AFTER-HEATING” function is for models PRANA 160, PRANA 200 and PRANA 200C. It allow ex-tend the temperature range of the Prana system to -25 ° C (-30 ° C). The function is turned on / off from the remote control or from the smart-phone using the Android application.
When working under extreme temperatures, it will prevent icing of the heat exchanger and fans of the recuperator. In the night mode, the temperature of the inflow air is additionally increased by 3-4 ° C.
** FUNCTION IN THE “WINTER MODE”
The function in the WINTER MODE is intended to prevent icing of condensate drain during cold season or to freeze it if icing has occured.
To avoid icing and to ensure the correct operation of the recuperator at a minus temperature outside, the use of the “Winter Mode” is obligatory.